PRODUCT CATEGORY
PRODUCT SEARCH
Contact us

Alansh Techonology CO., Limited.
Add:A413, Hui Baojiang Building,Minzhi Road,Longhua New District,Shenzhen,Guangdong,China 
Zip code: 518131
TEL: +86-755-3664 7747
Fax: +86-755-3664 7747
Email: sale@alansh.com
Skype:lily200894

Adblue Emulator
Location: HOME > PRODUCTS > Adblue Emulator > 

AdblueOBD2 Emulator Box Interface Plug & Drive Device - Adblue OBD2 Emulator

AdblueOBD2 Emulator Box Interface Plug & Drive Device
AdblueOBD2 Emulator Box Interface Plug & Drive DeviceAdblueOBD2 Emulator Box Interface Plug & Drive DeviceAdblueOBD2 Emulator Box Interface Plug & Drive Device
Roll over the image to view details.
Description Inquiry
AdblueOBD2 Emulator for Trucks Plug and Drive Ready Device by OBD2 EOBD OBDII 
 
Adblueobd2 is a Plug & Drive Ready device to emulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems,  even with damaged adBlue SCR system.
 
Top 5 Reasons to Get Adblueobd2:
1. Adblueobd2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. Adblueobd2 will override Adblue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. Adblueobd2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. Adblueobd2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
 
Adblueobd2 Installation and Calibration:
 
1) For SCANIA Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (SCANIA) Terminal- 42
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
2) For Volvo Truck:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (VOLVO) F10
3. Plug adBlueOBD2 into OBD2 connector
4.Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
3) For DAF Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (DAF) 6 - 15A  E357 - 20A
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
4) For MAN Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (MAN) 894 - 737 - 738
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
5) For IVECO Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (IVECO) Terminal - 5 Terminal - 15
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
 
6) For BENZ Trucks:
1.Pull the Key out from the ignition
2.Remove the following Fuses (MERCEDES BENZ) F1
3.Plug AdblueOBD2 into OBD2 connector
4.Turn on the ignition and check the level of adBlue, if it shows 50% or 70%
5.If any fault light appears on dashboard, delete via service scanner
 
Legal Notice
Adblue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions  in vehicles. We recommend you to use Adblue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.
 
Package Content:
1pc x AdblueOBD2 Emulator Box Interface
1pc x User Manuel English
My Information

Inquiring Products

Attached Message Click the image to get a different Verification code.Click the image to get a different Verification code.

Warning: strlen() expects parameter 1 to be string, array given in /home/cnsydcom/public_html/alansh.com/product_disp.php on line 182